Aquastrong G Booster: Automatic Water Pressure, Indoors or Out
A booster pump shouldn’t need babysitting. Yet many homes still rely on pumps that someone has to switch on manually, pressure tanks that lose their charge, and exposed motors that rust within a couple of monsoons. The Aquastrong G Booster was designed to remove all of that.
It is a new-generation automatic booster that combines the motor, tank, pressure switch and flow sensor in one sealed unit. Open a tap or shower and it powers on instantly; close it and it powers off. Its microcomputer control keeps the pump working smoothly even at very small flow rates, so a single basin tap gets the same reliable supply as a full shower.
The G Booster is self-priming with a suction lift of up to 8 metres, so it can draw water from an underground tank or other below-ground source as well as boost the supply from an above-ground tank. With a rust-proof body, IP55 weather protection and hot water capability up to 90°C, it’s built for the realities of Pakistani homes, from rooftops in summer to geyser lines in winter.
Smart Protection and Innovation
- Fully automatic operation: The pump turns on when you open a tap or shower and off when you close it, with no manual switching.
- Dry-running protection: If no water is detected in the pipeline, the pump powers itself off after 6 minutes, protecting the motor when the tank runs empty.
- Anti-seize self-run: If the pump sits idle for 48 hours, it automatically runs for 10 seconds to keep the impeller and seals free, which helps prevent jamming after long breaks.
- Water temperature protection: Safely pumps hot water up to 90°C with built-in protection against overheating.
- Small-flow performance: The microcomputer control system lets the pump operate normally at low flow rates for a steady water supply.
Features and Benefits
- All-in-one design: Motor, tank, pressure switch and flow sensor are integrated in one unit, making it more reliable and easier to install and operate than separate components.
- Self-priming up to 8m: Lifts water from below-ground sources up to 8 metres (ideal within 6 metres), so it can serve homes with underground tanks.
- Built for the outdoors: IP55 protection against rain, dust and UV exposure means it can be installed on a rooftop, terrace or outside wall.
- No rust: A corrosion-resistant construction keeps the pump looking and working like new for years.
- Very quiet: Operates at 50dB or less, much quieter than most self-priming pumps on the market.
- Hot and cold water: Handles liquid temperatures from 0°C to 90°C, suitable for geyser and solar heater lines as well as cold water supply.
- Low running cost: Models from just 200W to 400W keep electricity use modest while covering homes up to six floors.
- Compact footprint: At roughly 301mm tall and 181mm wide, it fits easily in tight utility spaces.
Choose the Right G Booster Model
Aquastrong sizes the G Booster by number of floors, based on one tap per floor at 0.7–0.9 m³/h and a suction lift of up to 8 metres. If a home has fewer floors than a model’s maximum, one extra tap per floor can be added.
- G200A (200W): For homes up to the 2nd floor, and apartments with 2–3 taps.
- G300A (300W): For buildings up to the 5th floor.
- G400A (400W): For buildings up to the 6th floor.
Every elbow in the pipeline costs about 1 metre of pressure, so complex plumbing may need the next model up. Send us your floors, taps and tank position, and our engineers will confirm the right model free of charge.
Technical Specifications
| Model | Power | Current | Max Head | Max Flow | Rated Head | Rated Flow | Start Pressure | Suction | Max Floor |
|---|---|---|---|---|---|---|---|---|---|
| G200A | 200W | 1.5A | 25m | 2.2 m³/h (37 L/min) | 18m | 1 m³/h (17 L/min) | 1.2 bar | 8m | 2nd floor |
| G300A | 300W | 2.5A | 30m | 2.5 m³/h (42 L/min) | 20m | 1 m³/h (17 L/min) | 1.8 bar | 8m | 5th floor |
| G400A | 400W | 2.7A | 35m | 2.5 m³/h (42 L/min) | 22m | 1 m³/h (17 L/min) | 2.1 bar | 8m | 6th floor |
Common to All Models
- Voltage: 220V / 50Hz
- Piping Size: 25mm
- Protection Class: IP55
- Max Ambient Temperature: 55°C
- Liquid Temperature: 0°C to 90°C
- Water pH: 6.5 – 8.5
- Solid Particles: ≤ 0.2mm; solid impurity volume ratio ≤ 0.1%
- Noise Level: ≤ 50dB
- Dimensions (H × L × W): 301 × 181 × 181 mm
Performance Data (Head at Flow Rate)
| Flow (L/min) | 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
|---|---|---|---|---|---|---|---|---|---|
| Flow (m³/h) | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 |
| G200A head (m) | 25 | 23 | 21 | 17 | 14 | 10 | 6 | 1 | – |
| G300A head (m) | 30 | 26 | 22 | 20 | 18 | 13 | 9 | 3 | 1 |
| G400A head (m) | 35 | 32 | 29 | 24 | 21 | 15 | 11 | 4 | 1 |
Where the G Booster Works Best
- Homes with underground tanks: Self-primes from up to 8m below and delivers water automatically to every floor.
- Above-ground and roof tank systems: Boosts weak gravity flow for stronger showers and taps.
- Apartments with 2–3 taps: The G200A gives a compact, low-power pressure boost for flats and portions.
- Multi-storey houses: The G300A and G400A cover buildings up to five and six floors.
- Outdoor installations: IP55 rating and rust-free build suit rooftops, terraces and courtyards.
- Hot water lines: Boosts supply from geysers and solar water heaters up to 90°C.
Why Buy from AY Internationals?
Automatic booster pumps depend on their flow sensor and control board, and those are exactly the parts that copies cut corners on. Buying from the right source protects your money and your home.
- Among the authorized dealers of Aquastrong in Pakistan: Every G Booster we sell is genuine stock sourced through official distribution, never grey-market imports or copies.
- Your Aquastrong supplier in Lahore: Local stock means faster delivery across Lahore and dependable dispatch to other cities in Pakistan.
- ISO 9001:2015 certified since 2015: Our sales, supply and service processes are audited to an international quality management standard.
- Official warranty support: Your pump is covered by the genuine Aquastrong warranty, handled directly by our team rather than passed between middlemen.
- Free technical guidance: Our engineers help you choose between the G200A, G300A and G400A based on your floors, taps, suction depth and pipe layout.
- Installation and after-sales service: AY Internationals provides supply, installation, maintenance and repair under one roof.
Frequently Asked Questions
How does the Aquastrong G Booster work automatically?
It has a built-in pressure switch and flow sensor. When you open a tap or shower, the pump senses the demand and switches on; when you close it, the pump switches off. No manual switching is needed.
Which G Booster model do I need?
Aquastrong recommends the G200A for homes up to the 2nd floor and apartments with 2–3 taps, the G300A for buildings up to the 5th floor, and the G400A for buildings up to the 6th floor, based on one tap per floor. AY Internationals offers free sizing advice to confirm the right model.
Can the G Booster draw water from an underground tank?
Yes. All G Booster models are self-priming with a suction lift of up to 8 metres, with best performance within 6 metres, so they can draw water from underground tanks and other below-ground sources.
Can I install the G Booster outdoors?
Yes. It is IP55 rated for protection against rain, dust and UV exposure, and its construction does not rust, so it can be installed on rooftops, terraces or outside walls.
What happens if the water tank runs dry?
The G Booster has dry-running protection. If no water is detected in the pipeline, it automatically powers off after 6 minutes to protect the motor.
Why does my G Booster run briefly when no tap is open?
That is the anti-seize feature. If the pump has been idle for 48 hours, it runs for 10 seconds by itself to keep the impeller and seals moving freely and prevent jamming.
Can the G Booster be used for hot water?
Yes. It handles water temperatures from 0°C up to 90°C and includes water temperature protection, making it suitable for geyser and solar heater lines.
How noisy is the G Booster?
It runs at 50dB or less, which is much quieter than most self-priming pumps available on the market.
Is the Aquastrong G Booster sold by AY Internationals genuine, with warranty?
Yes. AY Internationals is among the authorized dealers of Aquastrong in Pakistan, so every G Booster we supply is genuine stock covered by the official Aquastrong warranty, with claims handled directly by our team.
Where can I buy the Aquastrong G Booster in Lahore?
You can buy it from AY Internationals, an ISO 9001:2015 certified Aquastrong supplier in Lahore, located at 2nd Floor, Dar Plaza A-5/10, H-Block Commercial Area, Valencia Town, Lahore. Request a quote online or call/WhatsApp +92 300 8482031, available 24/7.
Do you provide installation?
Yes. Along with supply, AY Internationals offers installation, maintenance and repair through its team of experienced engineers and technicians, plus free technical guidance before and after purchase.
Open a Tap. Get Pressure. It’s That Simple.
Say goodbye to manual switches, rusty pumps and weak showers. Get your genuine Aquastrong G Booster from AY Internationals today, or tell our engineers about your home and we’ll recommend the right model for free.
Request a Free Quote / Get Expert Advice
Call or WhatsApp (24/7): +92 300 8482031
Reviews
There are no reviews yet.